Filter
Top Products
20
5. If the code was entered incorrectly, a message will appear on screen to advise that the code
was incorrect and ask you to try again.
6. If necessary, repeat steps 4 and 5 until the correct code is entered. Alternatively, to escape
from this option, press the RED button to take you back a step then select a channel which
is not locked.
TO TEMPORARILY UNLOCK ALL CHANNELS
1. If you temporarily want to unlock all your locked channels, the easiest way to do this is from
the choose channel to lock or unlock menu. (Press MENU, then buttons 3 and 2 in turn).
2. Enter your current code where requested.
3. With the channel list displayed press the GREEN button as indicated on-screen, this will
open all the padlocks. Pressing this button again will close the padlocks. The top of the
screen will indicate whether the locks are open or close.
IMPORTANT:
Don’t forget to your channels again after unlocking them all in this manner.
9.4 RE-ARRANGING YOUR CHANNELS
This feature enables you to swap two channel positions within the total channel list, so that they
are displayed in your prefered order.
1. Press the MENU button then button 5 and 2 to get access to change channel number menu.
2. A complete list of channels currently available on your digital receiver is displayed.
(Alongside these channels will be symbols to indicate whether they have been selected as
your favourite or locked channels).
3. To move a channel to an alternative location, firstly highlight the channel using the UP and
DOWN arrow buttons and press the SELECT button to choose that channel.
4. Now select the new channel location using the UP and DOWN arrow buttons to highlight the
channel number where you want to move the channel to. The original channel remains
highlighted.
5. Lastly, press the SELECT button to swap the two channel locations. Repeat the above steps
to move further channels or press the EXIT button to return to a normal TV picture.
6. Press the
B button to store the new order of your channels.