Filter
Top Products
MANUFACTURER DATA
This option shows various information about your digital receiver, such as it’s manufacturer and
the versions of hardware and software that it contains. This is another screen that will be used
by the ONdigital customer service people.
AUTO UPDATE
The final option on this menu can update the software used in your digital receiver. This may
update certain menus or functions of your digital receiver, as well as add new features, but the
general way in which it operates will not change.
Normally, this type of update will be broadcast to your receiver like any normal programme. The
receiver will detect the broadcast and update itself the next time it is switched on. Whilst this is
happening you may notice certain messages on the LED display on the front of the receiver.
These messages and their meanings are described below.
On other occasions, you may be asked to start this update process by a member of the
ONdigital customer services team. Before the update starts, a message will be displayed to ask
if you want to go ahead as it may change some of the personal settings you have made on your
receiver, such as locked or favourite channels.
FRONT PANEL MESSAGES
The front panel display can also indicate the status of your digital receiver during an auto update.
Messages include:
Auto update – this is indicating that your digital receiver is searching for an updated version of
software and then updating your receiver.
Update error – this will indicate that the software your receiver is currently using is in fact the
most up to date version.
Retrying update – this message may be seen when a newer version of software has been
located, but the receiver is having difficulty updating. In this instance, the auto update message
will be seen again as the receiver continues the update process.
Out of order – this indicates that your receiver has tried to update the software it currently uses,
but has been unsuccessful. It maybe necessary to contact your retailer, but if you are in any
doubt, call ONdigital customer services on 0870 600 9696.
9.12 ADDING NEW CHANNELS
This function can be used to add channels to your existing list of stored channels. Follow these
instructions should you wish to search for new channels that may have subsequently been
launched by the broadcasters.
1. Press MENU, then button 5 (getting started), and button 3 (add channels).
2. During the channel search the display on screen will indicate the number of channels that
have been found.
3. When the search is complete the channel list will be displayed showing any additional
channel, that were found.
29