Filter
Top Products
25
9.8 ALTERING YOUR ONdigital BOX SETTINGS
This menu offers the following options, enabling you to set the preferred language, subtitles, tv
volume, info display time and timer alarm. The steps involved in making changes to these
options are described below.
1. To see the receiver settings menu, press the MENU button, then 4 (viewing references),
then 1 (ONdigital box settings) on your remote. Each option can be highlighted using the UP
and DOWN arrow buttons.
2. When the required option is highlighted, you can make adjustments using the LEFT and
RIGHT arrow buttons.
3. When you have made the adjustment, press the RED button followed by the EXIT button on
your remote to save the new setting and return to a normal TV picture.
An explanation of each option is detailed below:
PREFERRED LANGUAGE
When your receiver is first switched on, the default setting for this option will be English. Other
options are Welsh and Gaelic. Should you wish to change the language, use the LEFT and
RIGHT arrow buttons. If the language selected is not available, the receiver will use English as a
default.
SUBTITLES
Similarly, this option will allow you to choose the language that subtitles are displayed in. Options
are English, Welsh, Gaelic and None. If any of the languages are selected, subtitles will always
be displayed when they are available. The SUBTITLE button on your remote, can be used to
switch the subtitles on and off. The option also includes a setting for hard of hearing people,
indicated by a symbol next to the language. This means that the subtitles will also include
descriptive text, such as telling the viewer when there is laughter or applause.
If the none option is selected, subtitles will not be displayed, even if they are available, unless
the SUBTITLE button on your remote is pressed.
You will know if subtitles are available for a programme either by a symbol that appears when
you look at the channel list, or if you are made aware of this by a broadcaster.
TV VOLUME
This option sets the default sound output level at wake up from your receiver to your TV. This is
factory set to a medium level, but you may notice that when switching between channels on your
digital receiver and channels on your normal TV, that the volume differs.
With this option highlighted, use the LEFT and RIGHT arrow buttons to adjust the digital
receivers volume to minimize this sound difference.
Note:
You should use the TV multibrand remote supplied with your digital receiver to adjust
volume levels (consult chapter 3 and 10), alternatively use your TV remote.