Philips DVDR3330H DVR User Manual


 
English
17
TV
Step 1: Basic Recorder Connections (continued)
OR
OR
Connecting the video cable
This connection enables you to view the
playback from this recorder. You only
need to choose one of the options
below to make your video connection.
Option 1: Using the Scart socket
(best picture quality)
Use the scart cable to connect the
EXT1 TO TV-I/O socket on the
recorder to the corresponding SCART
input socket on the TV.
Helpful Hints:
– If your TV displays a selection for the
SCART socket, select ‘VCR’ as the source for
the SCART socket.
– The EXT2 AUX-I/O socket is intended
only for additional devices.
Option 2: Using the S-Video socket
(excellent picture quality)
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) socket on
the recorder to the S-Video input socket
(or labelled as Y/C or S-VHS) on the TV.
Audio connection is required in order
to hear the sound, see page 18.
Option 3: Using the Video (CVBS)
socket (good picture quality)
Use a composite video cable (yellow - not
supplied) to connect the VIDEO
(CVBS) socket on the recorder to the
video input socket (or labelled as A/V In,
Video In, Composite or Baseband) on the
TV.
Audio connection is required in order
to hear the sound, see page 18.
Option 1
Option 2
Option 3
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
dvdr3300H_eu_eng_17223d.indd 17dvdr3300H_eu_eng_17223d.indd 17 2005-10-19 4:16:29 PM2005-10-19 4:16:29 PM