Philips DVDR3330H DVR User Manual


 
English
64
Problem Solution
Troub le shooti ng (continued)
No TV signal received from
the recorder.
Disc will not play.
The picture is distorted or
black and white during
playback.
There is picture or sound
interference with the TV
reception.
Distorted sound coming from
a connected hi- system or
ampli er.
Recordings are not occurring
as scheduled. New recordings
cannot be made.
The wrong TV channel was
decoded (recorded) after you
programmed a recording
using the SHOWVIEW
®
system.
– Have your antenna or cable TV signal checked.
Install the TV channel. Read chapter “Setup Menu Options -
Setup settings - Auto Install” for details.
– Insert the disc with the label facing up.
– Wrong region code. The DVD must be coded for ALL regions
or Region 2 in order to play on this recorder.
– There is no recording on the disc or wrong disc type. Read
chapter “Playback from Disc - Playable discs” for details.
– Make sure the disc is not scratched or warped. Clean the disc
or use a new one.
– Check if the disc is defective by trying another disc.
– The disc does not match with the TV colour system standard
(PAL/NTSC).
– The disc is dirty. Clean the disc.
– Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
– Have your antenna or cable TV signal checked.
– Fine-tune your TV channel. Read chapter “Setup Menu Options
- Setup Settings - Manual Search” for details.
– Do not connect any cables from the recorder to the ‘Phono’
input of your ampli er.
– If you are playing a DTS CD, you must use the COAXIAL or
OPTICAL-DIGITAL AUDIO OUTPUT socket of this recorder
to connect to the Hi-Fi system or ampli er.
– The TV channel you want to record is not stored or you
selected the wrong programme number. Check the TV channels
stored.
– You must reset the timer recording after adjusting the clock
setting.
– You cannot use the recorder to duplicate copyright material
(DVDs or videotapes) onto a recordable DVD.
– The hard disk might be full. Delete some titles to create space
for new recordings.
1) Enter the S
HOWVIEW
®
programming number of the desired TV
channel.
2) Press OK to con rm.
3) Check the channel number in the {Program #} input  eld. If this
does not correspond to the desired TV channel, select this
entry  eld and change the channel number.
4) Press OK to con rm.
dvdr3300H_eu_eng_17223d.indd 64dvdr3300H_eu_eng_17223d.indd 64 2005-10-19 4:16:44 PM2005-10-19 4:16:44 PM