Philips DVDR3330H DVR User Manual


 
English
8
This function enables you to record a programme
from your Satellite Receiver or any other devices.
Make sure that the device is connected to the
EXT2 AUX-I/O socket of this recorder, and the
timer setting has been done on the connected
device.
‘Time Shift Buffer’
As soon as you turn on this recorder, the
programme showing on the TV will be stored into
the ‘Time Shift Buffer’. It acts as a temporary HDD
storage of your recordings. The contents will be
automatically deleted after 6 hours or when you
turn off this recorder. To store the contents on
the hard disk permanently, you have to mark the
section in the ‘Time Shift Buffer’ for recording to
prevent them from being deleted.
‘FlexTime’
You can watch or recall a TV programme while it
is still being recorded. You do not have to wait
until the end of the recording before starting
playback. You can also watch a different
programme from the hard disk while it is
recording something else.
‘Instant Replay’
You can repeat a scene of a live TV programme by
pressing JUMP BACK button on the remote
control, as often as you like. If you wish to return
to the live TV programme, just press TUNER.
‘Pause Live TV’
A live TV programme is now under your control.
You can pause the programme by pressing PAUSE
button and resume playback at the scene it was
interrupted by pressing PLAY button. If you want
to return to the live TV programme, just press
TUNER.
Special Features
i.LINK, is also known as ‘FireWire’ and ‘IEEE
1394’. This connection is used for the transfer of
high bandwidth digital signals as used by digital
video (DV) camcorders. It carries all audio and
video signals via a single cable.
This is a simple programming system for
recorders. To use it, enter the programming
number associated with your television
programme. You can  nd this number in your
favourite listings magazine.
dvdr3300H_eu_eng_17223d.indd 8dvdr3300H_eu_eng_17223d.indd 8 2005-10-19 4:16:27 PM2005-10-19 4:16:27 PM