Filter
Top Products
10
Insert the remote control
batteries
1 Open the battery cover on the back of the
remote control.
2 Insert the two supplied batteries (Size AA).
Be sure the + and - ends of the batteries
line up with the markings inside the case.
3 Close the cover back into position.
Note
Remove the batteries if not using the remote control •
for an extended period of time.
Switch on the TV
The fi rst time you switch on the TV, check that
the mains cord cable is properly connected.
When ready, turn on the mains (if mains switch
is available), then press POWER on the side of
the TV.
Note
Certain TV models require you to press and hold •
POWER for up to two seconds. A beep sound
indicates that your TV is switched on. Your TV may take
up to 15 seconds to start.
Connect the mains cord
Warning
Verify that your mains voltage corresponds with the •
voltage printed at on the back of the TV. Do not insert
the mains cord cable if the voltage is different.
To connect the mains cord
Note
The location of the mains connector varies according •
to TV model.
1 Locate the AC IN mains connector at the
back or on the bottom of the TV.
2 Connect the mains cord cable to the AC
IN mains connector.
3 Connect the mains cord cable to the
mains, ensuring that the cord cable is tightly
secured at both ends.
UK - EIRE
EN