Filter
Top Products
40
7 Press MENU to exit.
Note
If you have further problems with the reception of your •
digital broadcast, contact a specialiszed installer.
Start a demo
1
Press the red key on the remote control.
Alternatively, press MENU on the remote
control and select [TV menu] > [Features]
> [Demo] .
2 Press to enter the [Demo] menu.
3 Select a demo and press OK .
4 Press the red key to exit.
Reset TV to factory settings
Resetting your TV to factory settings restores
default picture and sound settings. Channel
installation settings remain the same.
1 Press MENU on the remote control
and select [TV menu] > [Installation] >
[Factory settings] .
2 Press to enter the [Factory settings]
menu. [Reset] is highlighted.
3 Press OK to reset to factory settings.
4 Press MENU to exit.
unavailable, it is automatically removed from the
channel list.
In addition to the automatic update, you can
manually update the channel list.
1 Press MENU on the remote control
and select [TV menu] > [Installation]
> [Channel installation] > [Installation
update] .
2 Press to enter the [Installation update]
menu.
» [Start now] is highlighted.
3 Press OK .
4 Press the green key to start the update.
This may take a few minutes. »
5 When the update is complete, press
the red key to return to the [Channel
installation] menu.
6 Press MENU to exit.
Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1 Press MENU on the remote control
and select [TV menu] > [Installation]
> [Channel installation] > [Digital: Test
reception] .
2 Press to enter the [Digital: Test
reception] menu.
3 Press OK .
4 Press the green key to automatically start
the test or manually enter the frequency of
the channel you want to test.
If the signal quality and strength is are »
poor, reposition the antenna or satellite
dish and retest.
5 When complete, press the yellow key to
store the frequency.
6 Press the red key to return to the
[Channel installation] menu.
EN