Filter
Top Products
38
Step 1 Select your system
Note
Skip to Step 2 if your system settings are correct. •
1 Press MENU on the remote control
and select [TV menu] > [Installation]
> [Channel installation] > [Analogue:
Manual installation] .
2 Press to enter the [Channel installation]
menu. [System] is highlighted.
3 Press to enter the [System] list.
4 Press or to select your country or
region.
5 Press to return to the [Channel
installation] menu.
Step 2: Search and store new TV
channels
1 Press MENU on the remote control
and select [TV menu] > [Installation]
> [Channel installation] > [Analogue:
Manual installation] > [Search] .
2 Press to enter the [Search] menu.
3 Press the red key and use the number keys
on the remote control to manually enter
the three digit frequency. Alternatively,
press the green key to automatically search
for the next channel.
4 Press when the new channel is found.
5 Select [Store as new channel] to store the
new channel under a new channel number.
Channel install... Analogue: Manual...
System
Search
Fine tune
Store current ch...
Store as new ch...
Automatic install...
Installation update
Digital: Test recept...
Analogue: Manual...
Rearrange
1 In the [Installation] menu, press to
select [Time zone] .
2 Press to enter the list.
3 Press or to select your time zone.
4 Press to return to the [Installation]
menu.
Step 4 Install channels
Your TV searches and stores all available digital
and analogue TV channels as well as all available
digital radio channels.
1 In the [Installation] menu, press to
select [Channel installation] .
2 Press to enter the [Channel installation]
menu. [Automatic installation] is
highlighted.
3 Press to select [Start now] .
4 Press OK .
5 Press the green key to start. The installation
may take a few minutes.
6 When the channel search is completed,
press the red key to return to the
[Installation] .
7 Press MENU to exit.
Tip
When digital TV channels are found, the list of installed •
channels may display empty channel numbers. You
can rename, reorder or uninstall stored channels (see
‘Rearrange channels’ on page 999 ) .
Manually install channels
This section describes how to search and store
analogue TV channels manually.
EN