Filter
Top Products
Listening to a CD
1
3
4
2
6
5
These are the basic steps necessary to play a
CD with your DVD player. More advanced CD
operation is explained starting on the next
page.
1 Sourceicon
Shows which source has been selected.
2 CDindicator
Shows when a CD is playing.
3 Track number indicator
Shows the track currently playing.
4 Playtime indicator
Shows the elapsed playing time of the cur-
rent track.
5 Disctitle indicator
Shows the title of the currently playing disc.
6 Repeatindicator
Shows when repeat range is selected to cur-
rent track.
1 Press AV SOURCE to select the DVD
player.
Press AV SOURCE until DVD player is selected
as the source.
# If no disc is loaded in theunit, you cannot se-
lect the DVD player. Insert a disc in the unit.
(Refer to page 20.)
2 Touch the screen to display the touch
panel keys.
3 To skip back or forward to another
track, touch o or p.
Touching p skips to the start of the next
track. Touching o once skips to the start of
the current track. Touching it again will skip to
the previous track.
# You can also skip back or forward to another
track by moving the joystickleft or right.
4 Touch d to display m and n.
Touch d until m and n appear in the dis-
play.
5 To perform fast forward or reverse,
keep touching m or n.
# You can also perform fast reverse/fast forward
by holding the joystick left or right.
Notes
! When playing discs with MP3/WMAfiles and
audio data (CD-DA) such as CD-EXTRA and
MIXED-MODE CDs, both types can be played
only by switching mode betweenMP3/WMA
and CD-DA by touching DA·ROM or pressing
BAND/ESC. This function can be operated
only when the disc is playing.
! If you do not use the touch panelkeys within
30 seconds, they will be hiddenauto-
matically.
Stopping playback
% Touch g.
# When you stop CD playback bytouching g,
that location on the disc is memorized, enabling
Playing CDs
En
38
Section
07