Filter
Top Products
Adjusting initial settings
1
Initial settings lets you perform initial setup of
different settings for this unit.
1 Functiondisplay
Shows the function names.
1 Press AV SOURCE and hold until the
unit turns off.
2 Touch A.MENU and then touch INITIAL
to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# When A.MENU is not displayed,you can dis-
play it by touching the screen.
# You can also display MENU by clickingthe
joystick.
# To return to theprevious display, touch BACK.
# To return to thedisplay of each source, touch
ESC.
Switching the warning tone
If the front panel is not detached from this
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn
off the warning tone.
! Only when using this unit with ADD-ON
mode (M), you can operate this function.
1 Touch A.MENU and INITIAL and then
touch DT. WARNING.
2 Touch a to turn warning tone on.
# To turn warningtone off, touch b.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
! Only when using this unit with ADD-ON
mode (M), you can operate this function.
1 Touch A.MENU and INITIAL and then
touch AUX.
2 Touch a to turn auxiliary setting on.
# To turn auxiliary setting off, touch b.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
1 Touch A.MENU and INITIAL and then
touch DVD D. AUTO.
2 Touch a to turn automatic disc play-
back on.
# To turn automaticdisc playback off, touch
b.
Initial Settings
En
63
Section
12
Initial Settings