Filter
Top Products
Switching the wired
remote control setting
When using this unit with a Pioneer head unit
featuring jack for the wired remote control,
you can operate the basic function of each
source by touch panel key.
! Only when using this unit with IP-BUS
mode (S), you can operate this function.
1 Touch A.MENU and INITIAL and then
touch WIRED RMT.
2 Touch a to turn wired remote control
on.
# To turn wired remotecontrol off, touch b.
Selecting remote control
code type
When using this unit with a Pioneer DVD
player, changing the remote control code type
enables you to operate this unit only. Select
the appropriate remote code according to the
combined components.
! Only when using this unit with IP-BUS
mode (S), you can operate this function.
! Select CODE A when combined with a
DVD navigation unit.
! Select CODE B when combined with a
multi-DVD player.
Important
When changing the remote controlcode type,
switch the remote control selectionswitch on the
left side of the remote control to the appropriate
position. (Refer to page 62.)
1 Touch A.MENU and INITIAL and then
touch REM CODE.
2 Touch a or b to select the remote con-
trol code type.
Touch a to select CODE A. Touch b to select
CODE B.
Initial Settings
En
64
Section
12