Filter
Top Products
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
chart for DVD on page 79 to input the four-digit
code of the desired language.
1 Touch 09 to input the language code.
# To cancel theinputted numbers, touch C.
# You can also input the desired numberby
using the joystick and 0-9.
2 While the inputted number is dis-
played, touch ENTER.
Setting the audio language
You can set the preferred audio language.
1 Touch SETUP and LANGUAGE and then
touch AUDIO LANG.
An audio language menu is displayed and the
currently set language is highlighted.
# To switch to thesecond language select
menu, touch NEXT.
# To return to thefirst language select menu,
touch PREV.
2 Touch the desired language.
The audio language is set.
# If you have selected OTHERS, refer toWhen
you select OTHERS on this page.
Notes
! If the selected language is not recordedon
the disc, the language specifiedon the disc is
outputted.
! You can also switch the audio language by
touching AUDIO during playback. (Refer to
Changing audio language during playback
(Multi-audio) on page 31.)
! Even if you use AUDIO to switch the audio
language, this does not affectthe settings
here.
Setting the menu language
You can set the preferred language for dis-
plays of menus recorded on a disc.
1 Touch SETUP and LANGUAGE and then
touch MENU LANG.
A menu language menu is displayed and the
currently set language is highlighted.
# To switch to thesecond language select
menu, touch NEXT.
# To return to thefirst language select menu,
touch PREV.
2 Touch the desired language.
The menu language is set.
# If you have selected OTHERS, refer toWhen
you select OTHERS on this page.
Note
If the selected language is not recordedon the
disc, the language specified onthe disc is dis-
played.
Setting assist subtitles on
or off
Assist subtitles offer explanations for the au-
rally impaired. However, they are only dis-
played if they are recorded on the DVD.
You can turn assist subtitles on or off as de-
sired.
1 Touch SETUP and LANGUAGE and then
touch NEXT.
Setting up the DVD player
En
58
Section
11