Filter
Top Products
Recording
06
58
En
Setting the timer program using the VCR Plus+
system
The VCR Plus+ system simplifies timer recording so
that you just enter a PlusCode number (which you can
find in your TV listings guide) for the program you want
to record, tell the recorder whether you want to record it
just once or regularly, and then select the DVD or the
VCR for recording.
Note that for the VCR Plus+ system to work correctly,
the clock must be set to the right time and the guide
channels must be setup (see Checking the channel
setup to use the VCR Plus+ system above).
1Press VCR Plus+.
If a PROGRAM FULL message appears then you’ll need
to delete one of the existing timer programs before
continuing. Select a timer program from the list and
press CANCEL.
2 Use the number buttons to enter the PlusCode
number.
RETURN
CANCEL
VCR
Plus+
DELETE
BACK END
SELECT
INPUT NO.
0
-
9
VCR Plus+
PlusCode#
TYPE
OK
ONCE
1 - - - - - - - -
3Press to select “TYPE”.
ENTER
RETURN BACK
SELECT
ENTER
VCR Plus+
PlusCode#
TYPE
OK
ONCE
1 2 3 4 5 6 7 8 9
VCR
Plus+
END
OK
ONCE
DAILY
WEEKLY
Here you can set whether you want to record the
program ONCE, DAILY or WEEKLY. If you want to change
it, press ENTER then use the / buttons to select,
then press ENTER again.
4Press to highlight OK, then press ENTER.
ENTER
RETURN BACK
SELECT
ENTER
VCR Plus+
PlusCode#
TYPE
OK
ONCE
1 2 3 4 5 6 7 8 9
VCR
Plus+
END
If you’ve entered a valid PlusCode number, a summary
of the timer recording appears. You can edit any of this
information as necessary. Use the / buttons to
select the item you want to edit, press ENTER, then use
the / or / buttons as appropriate to select, then
press ENTER again.
ENTER
RETURN BACK END
SELECT
ENTER
TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
07
DVD
XP
OK
09/27(SA)
01:54AM
02:54AM
VCR Plus+
VCR
Plus+
• TYPE – select the frequency of the recording (more
options available here than in the previous screen,
such as every weekday)
•DATE (MM/DD) – the recording date
•START – recording start time
• END – recording end time
• CH – the channel to be recorded, or one of the
external inputs (L1 or L2)
• REC TO – record to the DVD or the VCR
• REC MODE – recording quality
• Note that If you haven’t set a guide channel for the
selected TV channel, the CH field will be blank (—).
In this case, set the channel number manually.
5 Highlight OK and press ENTER.
The TIMER REC SET screen appears and you should see
the new timer recording in the list.
TIMER REC SET
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
DVD
MON-SAT
09/27(SA) 01:35 02:35 80 DVD EP
15:00 16:00 08 VCR SP
SUN 17:00 18:00 12 XP
09/27(SA) 01:54 02:54 07 DVD XP
6Press SETUP to exit.
2G00201B_En_52_62 8/4/05, 10:5758