Pioneer PDP-428XDA Flat Panel Television User Manual


 
Setting up
08
29
En
Labeling TV channels
You can name TV channels that you have set up, using up to five
characters. This may help you easily identify the channels during
selections.
1 Press HOME MENU.
2 Select “Setup“ (/ then ENTER).
3 Select “Analogue TV Setup“ (/ then ENTER).
Enter your four-digit password using buttons 0 to 9 when
prompted.
4 Select “Label“ (/ then ENTER).
5 Select “Programme Entry“ (/).
6 Select a programme number (/).
You can select 1 through 99.
7 Select “Label“ (/ then ENTER).
The name entry screen appears.
8 Select the first character (/// then ENTER).
The cursor moves to the second character.
9 Repeat step 8 to enter up to five characters.
To correct entered characters, select [] or [] on the
screen, and then press ENTER. The cursor moves to the
preceding or subsequent character.
To delete the current character, select [Delete] on the
screen, and then press ENTER.
To put a space for the current character, select [Space] on
the screen, and then press ENTER.
10 To complete the name entry, press / or / to select
[OK] on the screen, and then press ENTER.
11 Press HOME MENU to exit the menu.
Sorting preset TV channels
Use the following procedure to change the sequence of the preset
TV programmes.
1 Press HOME MENU.
2 Select “Setup“ (/ then ENTER).
3 Select “Analogue TV Setup“ (/ then ENTER).
Enter your four-digit password using buttons 0 to 9 when
prompted.
4 Select “Sort“ (/ then ENTER).
The sort screen appears.
5 Select a channel to be shifted (/// then ENTER).
6 Select a new location (/// then ENTER).
Sorting is executed.
7 Press HOME MENU to exit the menu.
Note
To change a page on the Sort screen in step 6, select / on
the screen with / to select a page, and then press ENTER.
Language setting
For the language to be used in the Teletext mode while watching an
analogue TV channel, you can select from among West Europe,
East Europe, Greece/Turkey, Russia, and Arabia.
1 Press HOME MENU.
2 Select “Setup“ (/ then ENTER).
3 Select “Language“ (/ then ENTER).
4 Select a language (/).
5 Press HOME MENU to exit the menu.
Note
Teletext language supported by DTV is only English.
Label
Label
Programme Entry
1
1234567890
A
Delete
Space
OK
BCDEFGH I J
KLMNOPQRST
UVWXYZ, . : ;
&' ()+-*/_
@
Sort 1/4
AAAAA01
BBBBB02
CCCCC03
DDDDD04
EEEEE05
FFFFF06
GGGGG07
HHHHH08
IIIII09
10
11
12
13
14
15
16
17
RRRRR18
19
20
21
22
23
24
25
JJJJJ
KKKKK
LLLLL
MMMMM
NNNNN
OOOOO
PPPPP
SSSSS
TTTTT
UUUUU
VVVVV
WWWWW
XXXXX
YYYYY
QQQQQ
Language
Teletext
West Europe