Pioneer PRO-730HDI Projection Television User Manual


 
24
4
Select a channel.
There are three methods for this.
1 Select by pressing the number button
(Example)
Channel 5
(Or press and then press within 2 seconds
of during so.)
Channel 12 Press
and then press within 2 seconds of
during so.
After pressing a number button, even if you do not press the CH
ENTER button, the channel will be switched to the one selected within
2 seconds.
Depending on the channel, this switch may occur immediately after
the number button is pressed.
TO WATCH TV
Best Horizontal and Vertical Viewing Angle
The optimum viewing angle is 140˚ in horizontal and 45˚ in vertical.
Watch from at least 10 feet (3m) away from the screen (optimum viewing distance is 10 to
23 feet).
Remote control unit
1
Turn on the POWER.
The green ON indicator lights up.
3
Select antenna A or B.
Check the input signals at the ANTENNA A and B terminals.
Control panel of the monitorRemote control unit
Remote control unit
Control panel of the monitor
140˚
45˚
STANDBY
ON
STANDBY/ON
POWER
Green indicator
2
Set the mode switch to TV and
then press the TV button.
Remote control unit
Turn on the MAIN POWER button.
POWER CHANNEL MENU VOLUME
STANDBY/ON
POWER
SELECT
INPUT
KLCS
STEREO
31
CH
A
ARB1557A_En_020_025.P65 8/10/03, 14:2124