Pioneer PRO-730HDI Projection Television User Manual


 
54
1
Press MENU and select PICTURE .
(Refer to page 26.)
2
Select the adjustment item.
MENU
END
SET
SET
BLACK LEVEL 15
5
0
30
COLOR
TINT
SHARPNESS
SELECT
PICTURE
c
c
MODE :USER (STD)
CONTRAST 30
3
Adjust by pressing |, \, » or « .
The adjusting range is 30 to 30.
The numerical value comes down to press | and comes up to
press \.
The adjustment item change to press » or «.
MENU
END
SET
SET
ADJUST
CONTRAST
10
NOTES:
When picture quality has been adjusted, the user
mode data will be overwritten with the new
settings.
The COLOR, TINT, and SHARPNESS settings may
not be changed when receiving RGB input (INPUT
3).
The CONTRAST and BLACK LEVEL cannot be
adjusted in PRO mode.
COLOR, TINT, and SHARPNESS cannot be adjusted
in PURE DIGITAL:ON state during digital signal
input (INPUT 5, 6).
PICTURE ADJUSTMENTS
TO ADJUST THE PICTURE QUALITY
Adjust the picture quality when you want improve the quality of the picture
you are watching. You can adjust the CONTRAST, BLACK LEVEL
(brightness), COLOR, TINT and SHARPNESS.
CONTRAST ........... Adjusting the contrast to match the brightness of the
surroundings so it is easier to watch.
BLACK LEVEL (brightness)
........................ Adjusting the picture so that night scenes, dark hair,
and other dark parts of the screen are easier to watch.
COLOR .................. Adjusting it to the density you prefer. (It appears
natural if it is a little light.)
TINT ...................... Adjusting it so that flesh tones appear more attractive.
SHARPNESS ......... Normally use the center value.
When you want a soft sensation, set it so that the
scale moves in the minus direction.
NOTE:
If you are distracted by the screen display during adjustment, push the SET/
ENTER button for three or more seconds. You can do the adjustment with the
screen display shut off. Pushing any button on the remote control restores the
display.
4
After adjusting, press MENU to
turn the menu off.
The set picture quality will be stored in memory as USER mode
(see page 53).
Repeat steps 2 and 3 for other items.
ARB1557A_En_052_063.P65 8/8/03, 16:5254