Filter
Top Products
73
BASIC FUNCTIONS
MULTI-POINT CONVERGENCE
ADJUSTMENT
2
Adjust the center point convergence.
(Refer to steps 2 to 5 on pages 30 to 31.)
1
Press MENU and select SETUP
by using
the | or \ button and then pressing «
button. (Refer to page 26.)
3
Select ADJ MULTI-POINT .
MENU
END
SET
SET
SELECT
c
c
EXIT
ADJ CENTER POINT
ADJUSTMENT
ADJ MULTI–POINT
CONVERGENCE
FOR 480p
4
Select the adjust point.
MENU
END
SELECT
SET :SELECT AT POINT
5
Adjust the red line.
SET :BLUE POINT
MENU
END
SELECT
ADJ MULTI – POINT
NOTES:
•
The cursor is partially invisible around the edge of
the screen according to the SCAN MODE.
•
It is not possible to adjust all these points (points
of change on the cross-hatch).
•
Some of the cross-hatch lines are not straight, but
this is not a malfunction. They are not always
straight on a normal TV.
*1 Convergence adjustment ..... Color deviation adjustment
*2 Stabilized input signal .......... Examples, DVD player, digital tuner, etc.
Convergence adjustment may be fined-tuned here.
Before convergence adjustment*
1
, please choose a stabilized input signal*
2
in
order to display a stable cross pattern.
ARB1557A_En_068_074.P65 8/8/03, 16:5473