Planet Technology DVR-470 DVR User Manual


 
Page 25
Adjust preset description
In PTZ control mode, pressREC/SHOTkey, and press the preset number (three numeric
keys), DVR will adjust the corresponding preset number. Repeat pressingREC/SHOTkey,
and press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
NoteThe PTZ preset number is set already. Please refer to PTZ menu for preset setup. V1.4
firmware can support 128 preset numbers at most.
Start/Stop auto in PTZ control mode
In PTZ control mode, pressPLAY/AUTOkey to start PTZ auto function. Press
PLAY/AUTOkey again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto
function.You must enter into PTZ control mode again, and pressPLAY/AUTOkey to stop.
Exit PTZ control mode
PressESCorENTERto exit and return preview mode.