Planet Technology DVR-470 DVR User Manual


 
Page 74
Step 3Establish the dialup connection
Select the Modem connected with PC just like the dialup network connection, input the
telephone number connected with DVR’s modem. Input the username, password. They must
be the same as that DVR PPP setup.
Step 4During the dialup connection, it will give the message of “verification of username
and password”, after successfully verification; the message will be given “on process of
register in PC”. The process is the same as the common dialup connection.
Step 5After successful dialup, network will designate the “remote IP” address to PC, e.g.
the set 192.1.0.1. User can Ping-link the assigned IP address through Ping command, and can
Ping-link DVR. Please refer to the following picture.
Step 6You can preview the image of 192.1.0.2 by using client-end software.