Filter
Top Products
USER’S GUIDE FOR POLYCOM HDX SYSTEMS
WWW.POLYCOM.COM/VIDEODOCUMENTATION
26
To use the chair control options when you are in a multipoint call:
1. On a computer, open a web browser.
2. In the browser address line, enter the system’s IP address, for
example, http://10.11.12.13, to go to the video conferencing system’s
web interface.
3. Click Place a Call.
4. Click Chair Control to go to the Chair Control screen.
The Chair Control option is only available when the system is in a multipoint call. It
is not available in cascaded multipoint calls.
5. Select a site from the list and then use the controls in the web interface
to perform one of these actions:
If you
are…
You can do this… By selecting…
Pass chair controls to the selected
site.
Release Chair
View the selected site’s video. This
remains in effect until you choose
Stop Viewing Site or you release
chair control.
View Site
Return to viewing the video selected
by the chair or by the host.
Stop Viewing
Site
Send your site’s video to the other
sites.
Make Me the
Broadcaster
Send the selected site’s video to the
other sites.
Select
Broadcaster
Remove the selected site from the
conference.
Disconnect
Site
Chair
controller
Disconnect all sites and end the call. End
Conference
Request control of the conference. Acquire Chair
View the selected site’s video. This
does not change what other sites
see.
View Site
Participant
Return to viewing the video selected
by the chair or the host.
Stop Viewing
Site