Filter
Top Products
Setup and Connections
13
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 GUIDE Plus+ Menu
0 Exit
SETUP
1 Auto Channel Search
2 Add/Remove Channels
3 Auto Repeat
4 Auto Play: ON
5 GUIDE Plus+ Setup
6 Signal Type: CABLE
0 Exit
Set the Signal Type (Optional)
Note that if you have set up the GUIDE Plus+ system, Signal Type will
not be available.
The TV/VCR automatically selects the signal type (cable or antenna)
when you run the Auto Channel Search. If you want to change the
signal type, follow the directions below.
1. Press MENU on the remote to display the TV/VCR Main Menu.
2. Press 5 to display the Setup menu.
3. Press 5 to toggle the Signal Type between Antenna and Cable.
• After changing the Signal Type, you may need to re-enter the
channel number you are trying to receive.
• After changing the Signal Type, you may need to run the Auto
Channel Search again.
Add or Remove Channels from the TV/VCR’s Memory
This feature is not available if you are using a cable box and have set
up the GUIDE Plus+ system, regardless of whether or not you use the
GUIDE Plus+ system.
1. Press MENU on the remote to display the TV/VCR Main Menu.
2. Press 5 to display the Setup menu.
3. Press 2 to display the Add/Remove Channels screen.
4. Follow the directions on the screen to add or remove a channel.
5. Add or remove more channels by entering the channel number or
pressing CH ^ or v.
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 GUIDE Plus+ Menu
0 Exit
SETUP
1 Auto Channel Search
2 Add/Remove Channels
3 Auto Repeat
4 Auto Play ON
5 GUIDE Plus+ Setup
6 Signal Type: CABLE
0 Exit
ADD REMOVE CHANNELS
Channel 10
is presently ADDED
Press CLEAR to remove
Press MENU to exit