48
Features and Controls
News
The News menu lets you browse current news stories by headline.
1. Press GUIDE (the GUIDE Plus+ system appears). Then press MENU
to select the menu bar.
2. Use the arrows to highlight News.
3. Use the up and down arrows to highlight a story.
• Use the up and down arrows to browse one list at a time.
• Use CH ^ and v to browse through the list one page at a time.
4. Press the right arrow button to see full text.
5. Select MENU to return to the Menu bar, or press GUIDE or CLEAR
on the remote to exit the GUIDE Plus+ system.
Schedule
The Schedule menu lets you create timers for either viewing or
recording programs. The GUIDE Plus+ system allows one-button
recording. If you have a cable box, make sure you have connected the
G-LINK cable to it. See the subsection “Step 5: Connect the G-Link Cable”
in the section “Setup and Connections” for more details.
To schedule a program to watch or record:
1. Press GUIDE to bring up the GUIDE Plus+ system.
2. Highlight a program within the Channel listing.
3. Select Watch or Record from the Action buttons. The timer is then
automatically logged into the Schedule menu.
4. If you select Record, make sure to place a blank tape in the VCR and
leave the VCR turned off.
The Program information window will display a confirmation when you
have successfully created a timer to watch or record.
If you have selected two programs to watch or record which begin at
the same time or overlap, you will receive a timer conflict message. The
GUIDE Plus+ system will not schedule a conflicting timer, therefore you
must choose between the two programs.
To remove or change the frequency (daily, once, or weekly) of a
scheduled event, access the Schedule menu from the Menu bar.
1. Press GUIDE to bring up the GUIDE Plus+ system.
2. Press MENU to highlight the Menu bar.
3. Use the arrows to highlight the Schedule menu selection.
4. Use the up and down arrows to highlight the program you want
to edit. Then use the Schedule menu Action buttons as described
in the next section.
Schedule Menu Action Buttons
Schedule
Menu
Selection
The GUIDE Plus+ system recording timer
will override the VCR timer if you have set
conflicting timers.