Filter
Top Products
Setup and Connections
7
Connection E:
Attaching to a VCR for Copying Tapes
1. Connect as shown. Optional accessories may be required for this
connection.
2. Plug in power cords of VCR and TV/VCR.
3. For further instructions, see the section “Copying and
Editing Tapes.”
Press 00 on the remote to select the line (audio/video) inputs on the
TV/VCR to receive the signal from the VCR.
If your VCR has stereo AUDIO OUT jacks, connect the audio cable to the
jack labeled MONO. If neither jack is labeled MONO, you may need a
Y-adapter to hear both channels.
Connection F:
Attaching a Camcorder for Copying Tapes
1. Connect as shown. Optional accessories may be required for this
connection.
2. Plug in TV/VCR’s power cord.
3. For further instructions, see the section “Copying and
Editing Tapes.”
Press 00 on the remote to select the line (audio/video) inputs on the
TV/VCR to receive the signal from the camcorder.
If your camcorder has stereo AUDIO OUT jacks, you may need a
Y-adapter to hear both channels.
The unauthorized recording of television
programs and other materials may
infringe upon the rights of others.
IN FROM
ANTENNA
AUDIO
INPUT
VIDEO
TV/VCR
(Recording Only)
From Antenna, Cable
or Cable Box
Yellow
Video
Plug
White
Audio
Plug
Audio/Video
Cable
Optional
C
A
M
E
R
A
V
C
R
POW
ER
OFF
EDIT
AUDIO
RF
VIDEO
L
E
N
S
C
O
V
E
R
Camcorder (Playback Only)
G-LINK
IN FROM
ANTENNA
AUDIO
INPUT
VIDEO
VCR (Playback Only)
TV/VCR
(Recording Only)
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
Audio/Video
Cables
IN
OUT
VIDEOAUDIO
IN
OUT
From Antenna, Cable
or Cable Box
Optional
G-LINK