Filter
Top Products
Operating Instructions
25
Auto Play Feature
This feature enables the TV/VCR to automatically start playing a tape
when it is inserted. (The safety tab on the tape must be removed.)
1. Press MENU to display the TV/VCR Main Menu.
2. Press 5 to display the Setup menu.
3. Press 4 to change the Auto Play setting.
The Auto Play feature is set to On at the factory.
• Select On if you want a tape with its safety tab removed to start
playing automatically.
• Select Off if you do not want a tape with its safety tab removed
to start playing automatically.
Auto Repeat Feature
This feature tells the TV/VCR to play a tape (or part of a tape)
continuously. The TV/VCR will automatically rewind the tape, or a
selected portion of the tape, and play it repeatedly.
1. Using REVERSE, FORWARD, or PLAY on the remote, go to the place
on the tape that you want to be the beginning of the section that
automatically repeats. Reset the time counter to 0:00:00 by pressing
INFO, then CLEAR.
2. Using FORWARD or PLAY on the remote, go to the place on the
tape that you want to be the end of the section that plays
continuously. Remember the numbers on the time counter. (2:55 is
the end time for Auto Repeat in the example to the right.)
3. Press MENU to display the TV/VCR Main Menu.
4. Press 5 to display the Setup menu.
5. Press 3 to display the Auto Repeat menu.
6. Using the number buttons, enter the amount of time you want the
tape to repeat (the number from Step 2). In the example at right,
the section that the TV/VCR will automatically repeat is 2:55—two
hours, 55 minutes long.
To Cancel Auto Repeat
Press MENU, then 5, then 3, and then CLEAR.
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 GUIDE Plus+ Menu
0 Exit
SETUP
1 Auto Channel Search
2 Add/Remove Channels
3 Auto Repeat
4 Auto Play: ON
5 GUIDE Plus+ Setup
6 Signal Type: CABLE
0 Exit
TV/VCR MAIN MENU
1 Screen
2 Time
3 Timer Recordings
4 Parental Controls
5 Setup
6 GUIDE Plus+ Menu
0 Exit
SETUP
1 Auto Channel Search
2 Add/Remove Channels
3 Auto Repeat
4 Auto Play: ON
5 Signal Type: CABLE
0 Exit
AUTO REPEAT
Set the length of time you
want the tape to play in a
repeating loop
Loop from 0:00 to 2:55
(h:mm)
Press MENU to exit