Filter
Top Products
26
Operating Instructions
Index Search
The TV/VCR automatically records index marks on the tape each time
you begin recording. During playback you can locate the program you
want to play by the number of index marks. Your TV/VCR has two
index playback features. You can select a specific index number or
search by scan and play.
To Select Scan and Play Index Playback:
1. Insert the pre-recorded tape and press STOP.
2. Press SEARCH on the remote to display the Index Search screen.
3. Press FORWARD on the remote to scan forward or REW to scan in
reverse.
When the TV/VCR locates an index mark, it will stop and play a
few seconds of the program following the mark.
4. At any time during the search, press PLAY to stop searching and
begin playback, or press STOP to stop the search.
If the beginning or end of the tape is reached during the search,
the message “End of tape” appears.
To Select a Specific Index Number for Index Playback:
1. Insert the pre-recorded tape and press STOP.
2. Press SEARCH on the remote to display the Index Search screen.
3. Use the number buttons (0-9) on the remote to enter the number
of the index mark for which you want the TV/VCR to search.
4. Press FORWARD to search forward or REVERSE to search in
reverse.
When the TV/VCR locates the index mark, it will begin playback.
When using index playback, the following index marks may be
skipped by the TV/VCR:
• The mark closest to the current location on
the tape.
• The mark at the beginning of a recorded segment that is five
minutes or less.
• The mark at the beginning of the tape.
INDEX SEARCH
Press REW or FF to begin
search
OR
Enter a specific
Index Number
--
INDEX SEARCH
Scanning...
Index Number
01
Press STOP to cancel
INDEX SEARCH
Press REW or FF
to begin search
OR
Enter a specific
index number
--