Filter
Top Products
Setup and Connections
5
HOW TO Hook up a VCR or Camcorder
To hook up a VCR or camcorder for copying tapes, use Connection E or F.
Connection A:
Attaching to a Dipole Antenna (With No Cable Box)
Follow these steps to connect a dipole antenna to your TV/VCR. Do not
connect a dipole antenna if you plan to connect a different type of
indoor or outdoor antenna or cable system. Optional accessories may be
required for this connection.
1. Insert the antenna base into the slot on the back of your TV/VCR.
2. Connect the twin-lead ends of the antenna to the screw terminals of
an antenna adapter.
3. Connect an antenna adapter to the IN FROM ANTENNA jack on the
back of the TV/VCR.
4. Plug the TV/VCR power cord into the back of the TV/VCR.
5. Go to “Step 5: Connect the G-LINK Cable.”
Once you have plugged in your TV/VCR, adjust the length and position
of the antenna rods for the best reception. For viewing VHF channels,
extend the rods fully. For UHF viewing, shorten the rods.
Connection B:
Attaching to an Outside Antenna, Set-top Antenna, or
Cable System (With No Cable Box)
1. Connect as shown. Optional accessories may be required for this
connection.
2. Plug the TV/VCR power cord into the back of the TV/VCR.
3. Go to “Step 5: Connect the G-LINK Cable.”
IN FROM
ANTENNA
AUDIO
INPUT
VIDEO
Back of TV/VCR
Antenna
Adapter
Antenna
Mixers
Match Your Type of Antenna or Cable
or or or
G-LINK
IN FROM
ANTENNA
AUDIO
INPUT
VIDEO
Antenna Adapter
Twin-Lead Ends
Antenna Slot
Antenna Base
G-LINK