Filter
Top Products
Chapter 4: Basic operation
truVision DVR 31 User Manual 27
panel or remote control) to initiate sequence mode on the spot monitor.
Alternatively, click the Monitor button on the mouse toolbar to toggle to the spot
monitor function, and then click the Sequence button to begin sequence, as
shown in Figure 12 below.
Figure 12: Spot monitor function
Logging on
The DVR 31 is shipped with a predefined user for the system administrator. The
default system administrator logon uses “admin” as a user name with a password
of 1234. You can modify the admin password but not the admin user name. UTC
Fire & Security recommends that you change the admin password once you
have completed the installation and setup to protect against unauthorized
access. The seven predefined standard users are labeled User1 to User7 with a
default password of 4321 and level 4 access. The administrator can customize
these users and define their privileges. For more information, see “Managing
users”
on page 53”.
To log on to the DVR 31 user interface:
1. Click Menu.
2. Select a user in the Account field.
3. Use the mouse or the Down Arrow button to select the Password field.
4. Enter the corresponding password.
5. Click Confirm to enter the main menu.