Filter
Top Products
Chapter 6: Advanced setup
70 truVision DVR 31 User Manual
Figure 32: Ethernet Setting screen
To define Ethernet settings:
1. Click Network on the main menu to display the Network screen.
2. Click Ethernet Setting Setup to display the Ethernet Setting screen.
3. Select an Ethernet type.
4. Select On in the DHCP box to enable DHCP (Dynamic Host Configuration
Protocol) if the network automatically supplies an IP address. Otherwise,
select Off in the DHCP box and continue with steps 5 through 9.
5. Enter the network’s dynamic IP address in the IP edit box.
6. Enter the subnet mask in the Subnet Mask edit box.
7. Enter the gateway IP address in the Gateway edit box.
8. Enter the DNS IP address in the DNS edit box.
9. Enter the secondary DNS IP address box in the DNS2 edit box, if required.