Filter
Top Products
66
Sound Adjustment
4
4 Sound Adjustment
4.5 Speaker Settings
MENU
[] Sound Speaker Settings ENTER
[ ]
z Speaker Select (External Speaker / TV Speaker)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may
hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the
speakers attached to your audio receiver. If this occurs, set the TV to External Speaker.
When you set Speaker Select to External Speaker, the TV’s speakers are turned off. You
will hear sound through the external speakers only. When the Speaker Select is set to
TV Speaker, both the product speakers and the external speakers are on. You will hear
sound through both.
If there is no video signal, both the TV’s speakers and the external speakers will be mute.
z Auto Volume (Off / Normal / Night)
Normal equalizes the volume level on each channel, so that when you change channels, the volume
level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is
useful at night, when you may want to keep the volume low.
To use the volume control of a connected source device, set Auto Volume to Off. A change to the
volume control of the connected source device may not be applied if Auto Volume is set to
Normal or Night.
4.6 Reset Sound
MENU [] Sound Reset Sound ENTER
[ ]
Reset all sound settings to the factory defaults. Select Reset Sound, press [ ], select Yes in the pop-
up, and then press [ ] again.
m
m