Filter
Top Products
72
System
6
6 System
6.2.2 Sleep Timer
Automatically shuts off the product after a preset period of time. (Off, 30 min., 60 min., 90 min., 120
min., 150 min. and 180 min.)
Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer,
select Off.
6.2.3 On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
z On Timer: You can set up three separate On Timer configurations. (On Timer 1, On Timer 2,
On Timer 3)
You must set the clock before you can use On Timer.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select
Manual, you can choose the days you want On Timer to turn on your product.
The check mark indicates days you’ve selected.
Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to
enter numbers. Use the left and right arrow buttons to change entry fields.
Volume: Set the desired volume level. Use the left and right arrow buttons to change the
volume level.
Source: Select the input source of your choice.
Antenna (when the Source is set to TV): Select Air or Cable.
Channel (when the Source is set to TV): Select the desired channel.
If there is no music file on the USB device or you don’t select a folder containing a music file,
the Timer function does not operate correctly.
If there is only one photo file in the USB, the Slide Show will not play.
If a folder name is too long, the folder cannot be selected.Each USB you use is assigned its
own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
We recommend that you use a USB memory stick and a multi card reader when using
On Timer. The On Timer function may not work with USB devices with a built-in battery, MP3
players, or PMPs made by some manufacturers because the product can take too long to
recognize these devices.