Filter
Top Products
67
5 Using the Channel Menu
5
Using the Channel Menu
5.1 Channel
MENU
[] Channel ENTER
[ ]
This option is available when the input source is TV.
5.1.1 Antenna (Air/Cable)
MENU [] Channel Antenna ENTER
[ ]
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the LED display.
z Air / Cable
5.1.2 Auto Program
The Auto Program function memorizes all channels that are available over the air or through your cable
system and adds them to the Channel List.
To start Auto Program, follow these steps:
1 Push MENU [] Channel Auto Program ENTER
[ ]
on your remote. The Antenna
Source screen appears.
2 On the Antenna Source screen, select the source of your product signal.
z Air: If your product is connected to an antenna choose Air, and then press ENTER
[ ]
. The
product will automatically start memorizing channels.
z Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER
[]
. Go to Step 3.
The displayed image may differ depending on the model.
m
Channel
Antenna
Auto Program
Clear Scrambled Channel
Fine Tune
Cable
m
m