Filter
Top Products
36
Preparations
1
1 Preparations
Input source control
z Function
The input source of a product can be changed using a PC.
z Viewing input source state (Get Input Source Status)
z Setting the input source (Set Input Source)
"Input Source": An input source code to be set on a product.
Note. HDMI1_PC, HDMI2_PC and HDMI3_PC cannot be used with the Set command. They only
respond to "Get" commands.
Header Command
ID
Data length
Checksum
0xAA 0x14 0
Header Command
ID
Data length Data
Checksum
0xAA 0x14 1
"Input
Source"
0x14 PC
0x0C AV(AV1)
0x0D AV2
0x0E Ext. (SCART1)
0x08 Component
0x40 DTV
0x21 HDMI1
0x22 HDMI1_PC
0x23 HDMI2
0x24 HDMI2_PC
0x31 HDMI3
0x32 HDMI3_PC