English
- 15
Tuning Your Television for the DVD-
VCR
Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording.
• Preset your DVD-VCR to record a programme
automatically.
You must set the date and time when:
• You purchase the DVD-VCR.
• Do not forget to reset the time when you
change clocks from winter to summer time
and vice versa.
1 Press the MENU button, then press the OK or
" button.
2 Press the # or $ button to select Clock,
then press the OK or " button.
The Clock Set menu is displayed.
3 Press the % or " button to select the hour,
minutes, day, month, and year. The selected
option is highlighted. Press the # or $ button
to set them. The day of the week is displayed
automatically. Press the OK button.
•You can hold down the # or $!button to
scroll more quickly through the values.
• Press the MENU button to exit the menu.
You must tune your television for the DVD-VCR
only if you are using the RF cable.
To view pictures from your DVD-VCR when a
Scart cable is used, the television must be set to
the audio/video mode (AV).
1 Switch on the television.
2 Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-
VCR or STANDBY/ON on the remote control.
3 Select a programme position on the television
to be reserved for use with your DVD-VCR.
4 Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the "II button.
5 Start a scan on your television or set the tele-
vision to UHF channel 36.
6 Fine tune the television until the pictures and
sound are obtained clearly.
7 When the picture and sound are perfectly
clear, store this channel at the desired
programme position on the television.
That programme is now reserved for use with
your DVD-VCR.
Setting the Date and Time
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
"
Clock
"
Install
"
User Set
"
Auto Power Off : Off
"
Screen Messages : On
"
Clock Set
SETUP
VCR
PROG
FUNC
DVD
Time Date Year
12 : 00 01 / JAN / 2006 SUN
S
S
ettings
ettings