Filter
Top Products
24 -
English
Recording a Programme
Immediately
Before recording a programme, you must have
preset the corresponding station (unless you are
recording via an external video source). If you
have not done so, refer to pages 16~17.
1 Switch on the television.
2 Insert the video tape in to the VCR deck, with
the window visible and the safety tab intact or
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.
3 Select the station by pressing the PROG
( or ) button or select the source (AV1,
AV2 or AUX) by pressing the INPUT SEL.
button for a satellite tuner or external video
source. The station number is displayed and
the programme can be seen on the television.
4 Select the recording speed by pressing the
SPEED button as many times as required
(Refer to page 23).
5 Hold down the REC (●) button for a while to
start recording.
The record indicator appears on the television
and DVD-VCR display. An index is recorded
on the tape (Refer to page 29).
6 To stop recording, press the ■ button once.
• If your DVD-VCR ejects the cassette when
you start recording, check to make sure
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.
• If you reach the end of the tape while
recording, the cassette rewinds
automatically.
Recording a Programme with
Automatic Stop
This function enables you to record up to nine
hours (LP) of programmes.Your DVD-VCR stops
automatically after the requested length of time.
1 Switch on the television.
2 Insert the cassette on which the programme
is to be recorded, with the window visible and
the safety tab intact or the opening covered
with adhesive tape. The DVD-VCR is
switched on automatically.
3 Select the station to be recorded by pressing
the PROG( or ) button or select the
source (AV1, AV2 or AUX) by pressing the
INPUT SEL. button for a satellite tuner or
external video source. The station number is
displayed and the programme can be seen on
the television.
4 Select the recording speed by pressing the
SPEED button as many times as required
(Refer to page 23).
5 Hold down the REC (●) button for a while to
start recording. The record indicator appears
on the television screen and DVD-VCR dis-
play. An index is recorded on the tape (Refer
to page 29).
6 Press the REC (●) button several times to
increase the recording time in:
• 30-minute intervals up to four hours.
• 1-hour intervals up to nine hours.
The length is displayed on the television dis-
plays. The selected programme is recorded
for the length of time requested. At the end of
that time, the DVD-VCR stops recording auto-
matically and power off.
7 If you wish to cancel the recording before the
end, press the STANDBY/ON button.
• If the end of the tape is reached while
recording, the recording stops and power off.
LENGTH 2:30
SET LENGTH :
PRESS REC
●