Samsung DVD-V6600/ DVD Player User Manual


 
English
- 17
You do not need to preset the stations manually
if you have already set them automatically.
1 Press the MENU button, then press the OK or
" button.
2 Press the # or $ button to select Install,
then press the OK or " button.
The Install menu is displayed.
3 Press the # or $ button to select Manual
Setup, then press the OK or " button.
The TV STATION TABLE menu is displayed.
4 Press the # or $ button to select the
required programme number.
5 Press the " button to preset the station.
The MANUAL TUNING menu will be dis-
played.
Press the % or " button to start scanning the
channels. The frequency band is scanned and
the first station found is displayed.
Presetting the Stations Manually
4 Press the OK button to start the auto scan-
ning. The message Please Wait is displayed.
The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
• If you wish to cancel the auto scanning
before the end, press the MENU button.
The number of stations automatically stored by the
DVD-VCR depends on the number of stations that
it has found.
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (refer to
page 18).
SETUP
VCR
PROG
FUNC
DVD
Install
Auto Setup
"
Manual Setup
"
TV System : G
"
VCR Output CH : CH 36
"
❉ ❉ TV STATION TABLE ❉ ❉
PR CH NAME DEC
1 021 - - - -
OFF
2 004 - - - -
OFF
3
4
5
##$$!!""
SWAPPING : OK
DELETE : CLEAR RETURN
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
"
Clock
"
Install
"
User Set
"
Auto Power Off : Off
"
Screen Messages : On
"
Please Wait
10%
""
Auto Setup
Note