Filter
Top Products
English
- 21
Intelligent Picture Control
This feature allows you to adjust the sharpness
of the image automatically, according to your
own preferences.
1 During playback, press the MENU button,
then press the OK or " button.
2 Press the # or $ button to select User Set,
then press the OK or " button.
The User Set menu is displayed.
3 Press the # or $ button to select IPC
(Intelligent Picture Control), then press the OK
or " button.
• You can select the modes simply by press-
ing the IPC button.
4 To adjust the sharpness manually, press the
$ button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the % or " buttons until the picture is
displayed according to your preferences.
SETUP
VCR
PROG
FUNC
DVD
User Set
Colour System : Auto
"
NICAM : On
"
IPC : On
"
❉ ❉ PICTURE ❉ ❉
IPC : OFF
SOFTEN SHARPEN
%%!""
ON/OFF :
$$
❉
NICAM programmes are devided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual
(transmission in another language).
NICAM programmes are always accompanied
by a standard mono sound broadcast and you
can select the desired soound. Please refer to
page 39.
1 Press the MENU button, then press the OK
or " button.
2 Press the # or $ button to select User Set,
then press the OK or " button.
The User Set menu is displayed.
3 Press the # or $ button to select NICAM,
then press the OK or "!button to select On
or Off.
• On (for NICAM mode):
Normally set at this position.
• Off (for MONO mode):
Only set at this position to record the
standard mono sound during a NICAM
broadcast if the stereo sound is distorted
due to inferior reception conditions.
NICAM
SETUP
VCR
PROG
FUNC
DVD
User Set
Colour System : Auto
"
NICAM : On
"
IPC : On
"
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
"
Clock
"
Install
"
User Set
"
Auto Power Off : Off
"
Screen Messages : On
"