Filter
Top Products
52 -
English
Troubleshooting Guide (DVD)
The icon appears on
screen.
Disc does not play.
5.1 channel sound is not
being reproduced.
Playback mode differs
from the Setup menu
selection.
The screen ratio cannot
be changed.
No audio.
Forgot password.
If you experience other
problems.
◆ Ensure that the disc is installed with the label side facing up.
◆ Check the region number of the DVD.
◆
This DVD-VCR cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD.
◆ 5.1 channel sound is reproduced only when the following conditions are met.:
1) The DVD-VCR is connected with the proper amplifier.
2) The disc is recorded with 5.1 channel sound.
◆ Check whether the disc being played has the “5.1 ch” mark on the outside.
◆ Check if your audio system is connected and working properly.
◆ The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
◆ Some of the functions selected in the Setup menu may not work
properly if the disc is not encoded with the corresponding function.
◆ The screen ratio is fixed on your DVDs.
◆ Make sure you have selected the correct Digital Output in the Audio Options
Menu.
◆ Press STANDBY/ON with no disc in the unit. Press the $$ button on the
front panel for five seconds. Power off and on the DVD-VCR by pressing
STANDBY/ON button. The parental mode is now unlocked as indicated on the
display. You can now set your rating level and change your password to a new
number.
◆ Check the contents of the instruction book that contains the explanations
regarding the current problem and follow the procedure once again.
◆ If the problem still cannot be solved, please contact your nearest authorized
service center.
P3
P12
P33~34
P32~47
P32~36
P34
P33
P35~36
Problem
Solution
Page
ELLAS
A
S
d
a
T
h
e
e
p
e
E
e
E
t
P
t