Filter
Top Products
20 -
English
Before recording or playing back a cassette,
you can select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
• When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
• When you playback an NTSC-recorded tape
on this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB. If your TV is
multi system TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 Press the MENU button, then press the OK
or " button.
2 Press the # or $ button to select User Set,
then press the OK or " button.
The User Set menu is displayed.
3 Press the OK or "!button to select required
colour system. Auto ➝ PAL ➝ MESECAM ➝
B/W
• Auto: When playing back a cassette,
the system standard is automatically
selected by the DVD-VCR.
• B/W: Black and White.
Selecting the Colour Mode
SETUP
VCR
PROG
FUNC
DVD
User Set
Colour System : Auto
"
NICAM : On
"
IPC : On
"
V
V
CR
CR
F
F
unctions
unctions
Setting the VCR Output Channel
Your DVD-VCR output channel may need to be
changed if the pictures suffer from interference
or if your TV cannot find the pictures.
1 Press the MENU button, then press the OK
or " button.
2 Press the # or $ button to select Install,
then press the OK or " button. The Install
menu is displayed.
3 Press the # or $!button to select VCR
Output CH.
4 Press the OK or % or " button to select the
required output channel (CH21~CH69).
➝ CH21 ➝ ..CH36 ➝ ..CH69
• Press the MENU button to exit the menu.
Then tune your television again (see
page 15).
• You can select the required output channel
directly by using the number button.
SETUP
VCR
PROG
FUNC
DVD
Install
Auto Setup
"
Manual Setup
"
TV System : K
"
VCR Output CH : CH 36
"
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
"
Clock
"
Install
"
User Set
"
Auto Power Off : Off
"
Screen Messages : On
"
SETUP
VCR
PROG
FUNC
DVD
Setup
Language : English
"
Clock
"
Install
"
User Set
"
Auto Power Off : Off
"
Screen Messages : On
"