Filter
Top Products
5-3 5-4
DIGITAL VIDEO RECORDER
2
Retrieval by Date and Time
GBGB
Following screen appears and light of the PLAY( ) button flickers if pressing the SET/STILL
( ) button after entering date and time to retrieve and placing the cursor at search.
You can play retrieval data if pressing the PLAY( ) button. Press the STOP( ■ ) button to stop
play. Following screen is a screen appearing when pressing the PLAY( ) button. Date and time
below the screen show when currently played data are recorded and figures at the far end shows
which times of frame of the relevant second.
3
Recorded Data List View
The data on the HDD will be displayed as a list based on the recording start time. The list will
be updated every 30 minutes. Therefore, the system will create a new list at every half-hour on
the hour during the recording.
The system begins the recording when the RECORD(
●) button is pressed, or when a motion is
detected or alarm is triggered, or when the timer recording time is up, here the list of the data
recorded by motion detection or alarm occurrenceis not displayed.
Position the cursor at one of items on the list of the recorded data and press the SET/STILL
( ) button, then the following screen appears and the PLAY( ) button flashes.
At this time, if you press the PLAY( ) button, the selected data will be played back. To stop
the playback, press the STOP(
■ ) button for 3 seconds. The below screen is the screen when
pressing the PLAY( ) button.
DATE & TIME SEARCH
DATE 2002-01-01
TIME 00:00:00
[SEARCH START]
EXIT=[SEARCH] SEARCH=[SET/STILL]
O
SEARCH
O
»
2001-09-24 00:30:00
2001-09-24 00:34:28
O
SEARCH
O
»
2001-09-24 00:23:28
√ 2001-09-24 00:23:44
RECORD EVENT SEARCH [01/04]
ID EVENT DATE TIME
01 RECORD START 2001-09-24 00:23:28
02 RECORD START 2001-09-24 00:30:00
03 RECORD START 2001-09-24 01:49:31
04 RECORD START 2001-09-24 02:00:00
EXIT=[SEARCH] SEARCH=[SET/STILL]
1
1
1
1