Samsung SHR-3010 DVR User Manual


 
5-7 5-8
DIGITAL VIDEO RECORDER
6
Basic Playback
GBGB
Press the PLAY( ) button to immediately play back the data recorded on the HDD. Then, the
PLAY ( ) button lights up, the following screen appears, and the beginning of the recorded
data is played back in turn.
To stop the playback, press the STOP(
) button. Press the PLAY( ) button again to resume
playback from where you last stopped. The following message will appear and the playback
will stop when the data reaches the end of the HDD during playback. Press the PLAY( )
button again to play back from the beginning of the data.
Note
Note
- They can all be played back if the system is in the Live screen mode or in the
recording mode.
- While the user is in the menu, pressing the PLAY( ) button will not start the
playback. To start the playback, first exit the menu.
The light of SET/STILL( ) button turns and the light of the PLAY( ) button flickers if
pressing the SET/STILL( ) button during play. And following screen appears and it reaches
a temporary still status. In this case, you can see a still screen per frame forward or backward if
pressing the RIGHT( ) or LEFT( ) button.
To play back again, pres the SET/STILL( ) or PLAY( ) button.
Note
Note
Menu screen will not be displayed even if the MENU button is pressed during play
back. If the MENU button is pressed during playback, the following message will
appear. To view the menu screen, the playback must be stopped.
O
PLAY
O
2001-09-24 00:23:44
2001-09-24 02:24:03
O
DATA END
O
»
2001-09-24 00:33:42
2001-09-24 02:24:03
O
PLEASE STOP PLAY OR STILL
O
1
1
1
1