Temporay Stil Screen View
Press the SET/STILL( ) button during playback.
(For details on the pause mode, refer to “6. Basic Playback” on p. 5-7.)
View by Field
In order to view still images one field at a time, press the RIGHT( ) or LEFT( ) but-
ton during the pause mode, or turn the JOG( ) during the playback or pause mode. Press
the RIGHT( ) button or turn the JOG ( ) to the right to view still images one field at a
time in the forward direction, or press the LEFT( ) button or turn the JOG( ) to the
left to view them in the reverse direction.
To play back again, pres the SET/STILL( ) or PLAY( ) button.
Note
Note
JOG( ) and SHUTTLE( ) are displayed on below figure.
5-9
5-10
DIGITAL VIDEO RECORDER
7
Various Screen View Using JOG/SHUTTLE
GBGB
Play in Various Speed
The data recorded on the HDD will be played back as it is recorded. For example, if the
PICTURE QUALITY of the RECORD MODE SETUP is set to NORMAL and if the record-
ing is made with the PICTURE RATE set to 5.00FPS, then a Normal quality video will be
played back at 5 FPS as it is recorded.
To vary the playback speed, press the LEFT( ) or RIGHT( ) button during playback,
or turn the SHUTTLE( ) during playback or pause mode. The playback speed increases
when the RIGHT( ) button is pressed during playback and decreases the LEFT( )
button is pressed.
Turning the SHUTTLE( ) to the right changes the playback speed in the order of 1/5,
1/2, 1x, 2x, 3x, 5x, 10x, and 20x speeds in the forward direction, and turning it to the left
changes the playback speed in the order of 1/5, 1/2, 1x, 2x, 3x, 5x, 10x, and 20x speeds in
the reverse direction. Release the SHUTTLE( ) to return to the previous mode again.
Supported playback speeds are 1/5, 1/2, 1x, 2x, 3x, 5x, 10x, and 20x in forward and reverse
directions.
JOG
SHUTTLE