Filter
Top Products
Caution
Caution
The above contents can be changed without notice in order to improve the
performance or function of the product.
1-7
1-8
DIGITAL VIDEO RECORDER
4
Unpacking
GBGB
5
HDD Addition
When purchasing product, first remove packing and put it on a flat floor or at a place to use it.
Then, ensure all following contents are included:
◗ Main body
◗ User’s Manual
◗ 1 power cord
◗ 2 Rack Mount Adapter
◗ SCREW-MACHINE (PH, UNC6-32, L4.2, WHT) x 4
◗ Remote Viewer Program Installation CD
Mounting HDD
1. Unfasten the SCREW-SPECIAL (BWH, M4, L8, WHT) 11 EA attached to the left, right,
and rear of the product, and then remove the CABINET-TOP from the product.
2. Unfasten the SCREW-TAPTITE (BH, M3, L6 WHT) 3 EA to remove the HDD from the
BRACKET-HDD as shown in the picture.
3. Attach the HDD to the BRACKET-HDD as shown in the picture, and fasten the SCREW-
MACHINE (PH, UNC6-32 L4, WHT) 4 EA supplied as ACCESSORY.
4. Place the HDD with the BRACKET-HDD inside the product, and fasten the SCREW-
TAPTITE (BH, M3, L6 WHT) 3 EA.
5. Connect the Power Supply Cable and the AT-Bus Interface Cable. (Refer to “Cable
Connection” on page 1-10.)
6. Put the CABINET-TOP back on, and fasten the SCREW-SPECIAL (BWH, M4, L8,
WHT).
Caution
Caution
Basically, a product with two HDDs has two HDDs attached to the HDD brackets
as it is introduced to the market. And a product with a single HDD is supplied
with an extra HDD bracket aside from the HDD bracket for attaching the HDD.
HDD
BRACKET- HDD
SCREW-MACHINE(PH, UNC6-32, L4, 2, WHT)
SCREW-SPECIAL(BWH, M4, L8, WHT)
SCREW-TAPTITE(BH, M3, L6, WHT)
CABINET-TOP