Filter
Top Products
USER'S MANUAL
Eng-16
■ Rear
Rear
Video Input (BNC)
Video Input (RJ-11)
Audio In
Do not connect the Video In (BNC Input) and the RJ-11 (DIY Camera) input with the same channel at the same
time. Do not connect the Audio In(RCA Input) and the RJ-11(DIY Camera) input with the same channel at the
same time. If connecting them simultaneously, two input signals may be mixed when outputting. This is not the
product defect; so, please connect only one between the two inputs.
Symptom:
When 2 video signals are input simultaneously, the pictures overlap on the screen. At this time, noise appears
next to CH when the user enters each of the menus by pressing the MENU or SEARCH key. In this case,
although the noise disappears when the user exits the menu, it reappears when the user reenters the menu.
Countermeasure:
Remove one of the video signal inputs causing the problem and press the M.SCREEN key. Then the noise
that appeared next to CH in the MENU or SEARCH window disappears.
Caution
Names Function
Video Input( RJ11)
CH1 ~ CH8
Connector linked to the Port DIY CAMERA(SOC-C120, SOC-N120).
Video Input(BNC)
CH1 ~ CH8
Composite video signal input connector (BNC Style Connector).
NETWORK Connector for LAN cable connection.
Video Out Video signal output connector (RCA Jack)
Audio out Audio signal output connector (RCA Jack)
VGA In VGA signal input.
HOT Alarm output connector. Sends alarm signals to external devices.
COLD Connect to the ground terminal of the external devices.
A/R Alarm reset connector. Sends alarm reset signal to external devices.
GND Connect to the ground terminal of the external devices.
Audio In Audio Input signal connector from CH1 to CH4.(RCA Jack).
USER'S MANUAL