Filter
Top Products
Eng-38
USER'S MANUAL
1-2. Network Conguration : DHCP Client
1) If the IP of the SMT-190DN Server is DHCP :
Choose "DHCP Client".
2) Type in the addresses of DNS 1 and DNS 2.
3) Click Apply button to apply the settings.
If you click Reset button, the latest setting will be
applied again.
Click Back button if you don't want to apply the
setting.
4) If the mac address of an user is XX:XX:XX:FF:00:00,
a user who uses DDNS but does not know the IP can
connect the Viewer by typing as follows in the URL.
EX) http://wff0000.websamsung.net
Note
MAC Address.
Locate the MAC Address of the SMT-190DN (each
SMT-190DN has its own unique MAC address). It can
be checked in “ 5-9) NETWORK SETUP ” function
and setting method of SETUP MENU.
It is the last 6 digits as shown below.
07/07/07 00:00:01
NETWORK SETTING
1. NETWORK ACCESS STATIC...
2. HTTP PORT 00080
3. PICTURE QUALITY
NETWORK STATUS
IP ADDR 192.168.1.2
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.1
DNS 2 168.126.63.2
MAC ADDR 00:30:6f:ff:00:00
DDNS ADDR wff0000.websamsung.net
MENU -> SETUP MENU -> NETWORK SETUP
2. PPPoE (DSL) for Eth0
1) Service : Decide if you want to try PPPoE Connection
or not.
2) User ID : User's ID that is registered in the ISP.
3) User Password : User's password that is registered in
the ISP.
4)ConrmPassword:Conrmthepassword.
5) DNS (Domain Name Service) : Service to convert
a Domain Name (ex. www.yahoo.com) into an IP
address (ex. 216.109.127.28).
The SMT-190DN Server uses this service to join the FTP
server or other webs by the Domain Name.
DSL service supports only PPPoE (Point to Point over
the Ethernet).
DNS is a default value, so it does not need to be
changed.
Note
When connecting, ID & PASSWORD are limited to 40
characters.