Filter
Top Products
USER'S MANUAL
Eng-29
USER'S MANUAL
3. SEARCH START
- Input [YY/MM/DD] and [HH:MM:SS] to search and
press the ENTER ( ) button. And then, the related
data is searched.
- Use the
,
,
,
, key to change.
7-3) RECORD EVENT SEARCH
After pressing the search button, select the record event
search menu. The following screen is displayed.
07/07/07 00:00:01
RECORD EVENT SEARCH
ID EVENT DATE TIME
001
RECORD START
05/01/05 02:23:28
002
RECORD START
05/01/05 01:30:00
003
TIMER START
05/01/05 00:49:31
If you press the REC button among the data recorded in
the HDD, the data list recorded is displayed. Select the
record event list with the
,
key. Press the
ENTER button to search it.
7-4) ALARM EVENT SEARCH
After pressing the search button, select the ALARM
EVENT SEARCH. The following is displayed.
07/07/07 00:00:01
ALARM EVENT SEARCH
ID EVENT DATE TIME
001 ALARM START 01/01/05 12:45:20
002 MOTION START 01/01/05 10:10:15
- The data recorded on the HDD due to alarm
occurrence or motion is displayed by the recording
time. Select the ALARM/MOTION EVENT LIST by
use of the
,
key. And press the button to search
it.
7-5) LOSS EVENT LIST
The information including the channel, date and time is
displayed when VIDEO LOSS occurs.
07/07/07 00:00:01
LOSS EVENT LIST
NO CH MM/DD/YY HH:MM:SS EVENT
01.08 07/02/07 03:07:38 LOSS
It is possible to check the list of next page by use of
,
key.
7-6) POWER EVENT LIST
Displays the date and time information with the list when
the power is turned on.
07/07/07 00:00:01
POWER EVENT LIST
NO MM/DD/YY HH:MM:SS EVENT
02 01/01/05 04:07:38 POWER
03 01/01/05 02:11:56 POWER
04 01/01/05 00:23:24 POWER
It is possible to check the list of next page by use of
,
key.
7-7) BASIC PLAYBACK
Press the PLAY/STILL button to play the data recorded in
the HDD immediately.
Playback starts displaying the following screen.
Play 07/01/05 00:00:01
CAM1 CAM2 CAM3
CAM4 CAM5 CAM6
CAM7 CAM8
If there is no data recorded, "NO DATA" message is
displayed.
NO DATA
Note
- If the user is in the menu, the playback does not
start even if the PLAY button is pressed. Exit from
the menu rst to start the playback.
- Press the stop button to stop the playback. If the
PLAY/STILL button is pressed again, the system
starts the playback from the last stop.
- If the nal data of HDD nishes playing back, the
rst data of HDD is played again.
USER'S MANUAL