Filter
Top Products
9-4) SINGLE SCREEN DISPLAY
Initial display mode of monitor is 9 splits. If you want
to see the camera image at full mode, select a target
camera by using the CHANNEL KEY. After that, press
the ENTER SWITCH and selected camera image will be
displayed at full screen. If you press the
/
or
/
KEY SINGLE DISPLAY MODE at this time, you can see
another camera image at full screen. For example, when
you want to see CH1 at FULL MODE after SINGLE -
displaying CH2 at 9 splits, please follow the instructions
below.
INITIAL DISPLAY STATUS
07/01/05 00:00:01
CAM1 CAM2 CAM3
CAM4 CAM5 CAM6
CAM7 CAM8
Select CH1 by using CHANNEL
KEY
07/01/05 00:00:01
CAM1 CAM2 CAM3
CAM4 CAM5 CAM6
CAM7 CAM8
07/07/07 00:00:01
CH1
07/07/07 00:00:01
CH2
FULL SCREEN DISPLAY of
CH2
Press CH2
KEY.
FULL SCREEN DISPLAY of CH1
9-5) QUAD MODE DISPLAY
Users can switch SINGLE DISPLAY MODE and
SEQUENTIAL DISPLAY MODE to QUAD DISPLAY
MODE, or QUAD-A (QUAD-B) to QUAD-B(QUAD-A) or
PIP MODE to QUAD MODE. Press the QUAD/PAGE
KEY.
QUAD MODE display from SINGLE MODE or
SEQUENCE MODE.
07/07/07 00:00:01
CH1 CH2
CH3 CH4
QUAD A
07/07/07 00:00:01
CH1
CH1 DISPLAY
Press
MODE Key
QUAD MODE DISPLAY
of QUAD - A
QUAD B(QUAD A) display from QUAD A(QUAD B),
07/07/07 00:00:01
CH5 CH6
CH7 CH8
QUAD B
QUAD MODE DISPLAY
of QUAD - B
Press
MODE Key
QUAD MODE DISPLAY
of QUAD - A
07/07/07 00:00:01
CH1 CH2
CH3 CH4
QUAD A
USER'S MANUAL
Eng-44
USER'S MANUAL