Samsung SMT-190Dx DVR User Manual


 
USER'S MANUAL
Eng-25
07/07/07 00:00:01
NETWORK SETTING
07/07/07 00:00:01
CAM1
4) Open your Internet Explorer web browser.
UsingaStatic(xed)IP,Youmayalsoconnect
remotely by typing in the IP address of the SMT-
190DN, Such as
http://192.168.1.200
Note
HTTP Port
Set the port to be used when connecting to
SMT-190DN in Internet Explorer and receive the
necessary les for image transmission.
The port setting is used for various network congura-
tions or a particular port etc.
Caution
A port number is reserved for TCP port and HTTP
port setting. Default values should not be changed.
However, if the IP Router is used in a network
environment, input proper values with reference to
the IP Router manual.
If the SMT-190DN is using a Router, you may also
connect remotely by typing In the WAN IP Address of the
Router and the HTTP port assigned to the SMT-190DN.
(here you must type in the port address even if it is the
default “80”), such as
http://192.168.1.200:80
1) Move to ‘DHCP...’ by using
/
KEY in NETWORK
ACCESS, then press ENTERSWITCH to set to
DHCP.
07/07/07 00:00:01
DHCP ACCESS
DNS 1 168.126.63.1
DNS 2 168.126.63.2
2) DNS 1 and DNS 2 will be automatically set to DNS as
shown above. Use
/
KEY to change it.
3) After setting, move to the main screen by using the
MENU button.
4) Set values will be stored as shown below.
It takes 30 to 35 seconds.
07/07/07 00:00:01
NETWORK SETTING
07/07/07 00:00:01
CAM1
5) You can view the video source of the SMT-190DN
from a remote location PC.
6) Open your Internet Explorer web browser, type in the
following in the URL window and press Enter.
http://wff0000.websamsung.net
Where ff0000 is the MAC address of your
SMT-190DN in this example. If your SMT-190DN
MAC address is ff0001, then type in ff0001
instead of ff0000.
Note
MAC Address.
Locate the MAC Address of the
SMT-190DN
(each
SMT-190DN
has its own unique MAC address)
It can be checked in “5-9) NETWORK SETUP” of
SETUP MENU’. It is the last 6 digits as shown below.
07/07/07 00:00:01
NETWORK SETTING
1. NETWORK ACCESS STATIC...
2. HTTP PORT 00080
3. PICTURE QUALITY NORMAL
NETWORK STATUS
IP ADDR 192.168.1.2
GATEWAY 192.168.1.65
SUBNETMASK 255.255.255.0
DNS 1 168.126.63.1
DNS 2 168.126.63.2
MAC ADDR 00:30:6f:ff:00:00
DDNS ADDR wff0000.websamsung.net
Caution
If you change the HTTP port number 80 to 1025, then
you must type in as the address bar below. The de-
fault port number is 80. You may need to change the
port number if you cannot link to the security system
from a remote location due to a rewall or if you have
other issues.
http://wff0000.websamsung.net:1025
At this time, you should add “w” in front of “mac
address”.
USER'S MANUAL