Filter
Top Products
■ Remote Controller
Eng-17
USER'S MANUALUSER'S MANUALUSER'S MANUALUSER'S MANUALUSER'S MANUALUSER'S MANUAL
Button Function
SCR. SAVE Allows users to set the monitor's SCREEN SAVE MODE.
0 ~ 9 Channel KEY/Number Key.
ID RESET
The Remote ID is reset to 1.
SYSTEM ID
SYSTEM ID setting. Press the SYSTEM ID KEY and the
number keys to input the SET's ID. (Refer to SYSTEM ID. (Eng-24))
M.SCREEN QUAD - A,QUAD - B, 9 split screens selection
VOLUME (+/-) Increase and Decrease sound volume from the monitor.
PIP Picture In Picture.
ZOOM X2 screen in Single Channel.
FREEZE
Allows users to see a target camera picture in the PAUSE MODE.
MENU
Displays menu items. Use this also to exit the sub menu and return to
the menu at the next highest level.
DVR/LCD Selects DVR mode or LCD MONITOR mode.
LIVE/P.B
/TRIPLEX
LIVE/PB/TRIPLEX modes are converted in sequence
SEARCH Search video/audio signals recorded in HDD.
▼, ▲,
,
▼,▲,
,
directional keys.
key is used for Fast Forward during playback and Step Forward
during pause.
key is used for Fast Reverse during playback and Step Reverse
during pause.
ENTER Use to select a menu item or to accept the changed value.
Plays back DVR recorded data. Temporarily stops during
playback.
Stops DVR playback or recording.
Records live video.
Lock STOP keys during recording to prevent accidental
operation of the unit.
VGA PIP
PIP - Available in VGA Mode
Push the PIP button to turn PIP screen On/Off.
MUTE
Press to mute the sound temporarily. Displayed on the
bottom left of the screen. Press the MUTE button again to cancel the
Mute function.Alternatively press the - or + button to cancel the Mute
function.
AUTO
Available In VGA mode Only
Adjusts the screen display automatically.
SOURCE
Press the 'SOURCE' button to change the input signal source. Changing
the source is allowed only in external devices that are connected to the
monitor at the time. [DVR / VGA]
UNDER SCAN Displays the entire video signal on the screen.
P.MODE
Available in DVR Mode Only.
Presstoselectapre-denedPictureModeofthemonitorortochange
the picture atmosphere as required. When you press this button, current
mode is displayed on the lower center of the screen. The monitor has
four automatic picture settings that are preset at the factory.
Then push button again to circle through available
reconguredmodes.(Dynamic,Standard,Movie,Custom)
USER'S MANUAL