Filter
Top Products
Eng-46
USER'S MANUALUSER'S MANUAL
Chapter 10 : Monitor
Setup Menu
No Signal Display
When there is no connection at the VGA input, the On
Screen Display will show this message.
<VGA mode>
Check signal cable.
VGA
OSD Menu Selection
Press DVR/LCD button to select LCD MENU or DVR
MENU by turns. If DVR/LCD LED is green,it means LCD
mode. if it is red, it is DVR mode.
A. Input Menu
Input
Source List : DVR
PIP
Edit Name
Move Enter Exit
Inputs can be set to VGA mode.
1. Press the MENU and ENTER button.
2. Press the ENTER or
button and then
/
button to select input menu.
3. Press the ENTER or
button to save the setting
and exit.
PIP ON (VGA mode only)
PIP
Move Enter Return
PIP : Off
Size :
Position :
If you didn't select VGA input, this menu is not available.
1. Press the MENU and ENTER button.
2. Press the
/
and ENTER button to select the
PIP menu.
3. Press the ENTER or
button to see the sub menu.
4. Press the
/
and ENTER button to select On.
5. Press the MENU or
button repeatedly to exit.
USER'S MANUAL